Tel: 07947523270

266 Swinnow Lane Leeds LS13 4HP uk

This Version of the Mflow now allows easy reset of the unit from the transmitter. Therefore measurement of the fuel used can begin right after you have removed your taxi tank

Our Price

£83.55

 Please allow a few seconds for the shopping cart to be updated

New Version!

M-Bar sensor

Our Price £67.27


 Please allow a few seconds for the shopping cart to be updated

RC Switch

Weight [g] 6
Dimensions [mm] 19 x 14 x 4
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 10

More info and manuals can be found HERE

Weight [g] 40
Dimensions [mm] 77 x 41 x 30
Operational temperature [°C] -20 ... 85
Supply Voltage [V] 5 ... 8.4
Average Current [mA] 20 
Measurement range 20-800 ml/min
Measurement accuracy ±2%
Tubing connection 2x Festo Ø4mm

More info and manuals can be found HERE

Our Price

£181.73

MFlow2 Turbine 800 EX

The MFlow is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. There are two versions of the sensor available. The MFlow-Turbine is a variant designed for the models powered by a jet engine, the MFlow-Gasoline is a variant for the models powered by glow or gasoline motors.

Main features •The sensor is compatible with Duplex EX system.
•EX telemetry values: actual flow and the amount of the fuel in the tank.
•User adjustable parameters, such as tank capacity, depleted fuel alarm, etc.
•Firmware updates.
MFlow consists of the flow sensor and the base. The sensor is connected to the base via a cable with a lock connector. The other cable labeled as „Ext“ is used for the DUPLEX system or the JETIBOX. The flow sensor is fitted with these endings according to the type:
MFlow T: 2x FESTO for tubes with the external diameter of 4mm

Weight [g] 40
Dimensions [mm] 72 x 41 x 30
Operational temperature [°C] -20 ... 85
Supply Voltage [V] 5 ... 8.4
Average Current [mA] 20
Measurement range 20-800 ml/min
Measurement accuracy ±2%
More info and manuals can be found HERE

MFlow G EX

The MFlow is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. There are two versions of the sensor available. The MFlow-Gasoline is a variant for the models powered by glow or gasoline motors.

Main features •The sensor is compatible with Duplex EX system.
•EX telemetry values: actual flow and the amount of the fuel in the tank.
•User adjustable parameters, such as tank capacity, depleted fuel alarm, etc.
•Firmware updates.
MFlow consists of the flow sensor and the base. The sensor is connected to the base via a cable with a lock connector. The other cable labeled as „Ext“ is used for the DUPLEX system or the JETIBOX. The flow sensor is fitted with these endings according to the type: MFlow G: 2x barbed fittings for tubes with the internal diameter of 2 mm a 2x barbed fittings for tubes with the internal diameter of 3 mm

Our Price

£181.73

Weight [g] 4
Dimensions [mm] 36 x 20 x 5
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 8

More info and manuals can be found HERE

EXPANDER E4 EX

The EXPANDER E4 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 4 sensors to a DUPLEX receiver. The expander can be set in a way which enables the JETIBOX to show several measured values simultaneously.

Our Price

£34.45

Weight [g] 11
Dimensions [mm] 38 x 12 x 6,5
Sustained current [A] 3
Operational temperature [°C] -20 ... 85 Recommended input voltage [V] 5 .. 8,4
Input voltage max. [V] 16
Peak current (max 5s) [A] 12

More info and manuals can be found HERE

EnLink 2RS

EnLink 2RS is a device for increasing safety and reliability of radio controlled models to the highest level. Parallel connection of systems that are detached maximally leads to the significant increase in reliability. EnLink2RS is constructed especially for installing to systems with parallel sorting of two receivers in the model.

Our Price

£36.27

Weight [g] 24
Dimensions [mm] 50 x 30 x 13
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 40
Memory [MB] 4

More info and manuals can be found HERE

MGPS EX

Exact information about the altitude and distance of a model in space are extremely important guidance elements for the pilot who is remote controlling the model. Thanks to the GPS satellite positioning system the MGPS sensor defines the exact model position and calculates speed, altitude and distance from the point of origin, furthermore the course, azimuth and the total covered distance.

In order to be able to record the measured data the MGPS sensor is equipped with a memory for approximately 9 hours of uninterrupted data recording with a numerosity of one record per second (4 MB MGPS version). For a simple analysis of measured data the sensor keeps information of minima and maxima which can be browsed with the aid of the JETIBOX. A more detailed analysis of measured data can be achieved by copying data from the sensor to a PC and map depicted trajectories or carry out other analysis modes. With the aid of the wireless DUPLEX system actual information of the MGPS sensor can be transmitted and depicted in real time by the JETIBOX terminal or DC/DS transmitters.

Our Price

£105.36

Weight [g] 6
Dimensions [mm] 19 x 14 x 4
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 10

More info and manuals can be found HERE

MRPM EX

MRPM EX module is designed to measure the RPM of all types of engines. The measurement is performed by using optical sensor. Module MRPM measures actual rotation and actual power of the propeller. The max speed and the max propeller output power are recorded as well. For display of measured values JETIBOX terminal is used, with the possibility of wireless transmission of information in real time using the DUPLEX 2,4 GHz system.

Our Price

£34.45

MRPM-AC EX

The sensor MRPM EX-AC is used exclusively for measuring the speed of brushless DC motors (BLDC). It is connected to any two motor phases and it calculates the current speed from the electrical course at the phases. With the help of the sensor MRPM-EX AC, current speeds and the past course of the propeller performance (minimum, maximum) can be monitored.

The sensor can be adjusted to set the timeout parameter which will be later announced to the user. Because the sensor is connected to the motor power system, the user must adjust the number of motor poles and the gear ratio of the transmission system to ensure proper operation. The information from the sensor are transmitted to the user via the Duplex system.

Our Price

£34.45

Weight [g] 21
Dimensions [mm] 22 x 25 x 13
Operational temperature [°C] 0 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 10

More info and manuals can be found HERE

MSPEED E2 EX

MSPEED EX is a sensor which measures the speed of a flying model through the air to provide the indicated airspeed (IAS). The reporting of airspeed can be very instructive with regard to the control of a flying model, for example allowing the pilot to determine the model´s stall speed and set an alarm to indicate when the model falls below this speed. Another function of the sensor is to allow the pilot to set a desired speed and a step above or below this speed at which an acoustic signal should be sounded by the transmitter module.
To facilitate easier reading of the indicated airspeed, a bar graph is displayed, marking the appropriate configured steps. The measurement of airspeed is based on the principle of change in dynamic pressure, measured by a Pitot tube, which is connected by silicon tubing. With the help of the wireless Duplex system, this sensor information can be reported to the pilot in realtime, allowing immediate feedback in airspeed changes and a deviations from the configured steps.

Our Price

£68.09

Weight [g] 10 Dimensions [mm] 19 x 14 x 4
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 7
Number of temperature probes 2
Range of measured temperature [°C] -55 ... 125
Accuracy of measurement [%] 0,5

More info and manuals can be found HERE

MT 125 EX

Designation of MT 125 EX Sensors are temperature measurements of devices like motors, controllers, batteries, and other model accessories. Presentation of the measured data is realized by the JETIBOX terminal and the wireless information transfer is ensued with the aid of the DUPLEX 2,4GHz system.
The Duplex System takes advantage of the 2,4GHz-Band for communication which allows not only the transfer of remote control data to the model, but also in the opposite direction to the transmitter. The telemetric data measured during operation are transmitted in real time and the actual state of the data can be depicted on the JETIBOX LCD-display. The MT unit records minimum and maximum temperatures of the individual sensors and delivers besides that their actual values.
The JETIBOX terminal takes care of parameter adjustments as well as of indications of measured data. The MT 125 EX device consists of two parts. In the first instance of the MT 125 EX module itself, which is recording the data measured by temperature sensors connected to the MT 125 EX module, which on the other hand can be connected to the JETIBOX, to a receiver or to an Expander of the DUPLEX system. Keep an eye on the temperatures of the module and sensors in order not to expose them to temperatures higher than allowable – see technical data table.
The MT 125 EX module allows triggering of acoustic alerts by the individual sensors. These alerts can report of temparature limit violations by too high or too low temperatures exceeding adjusted limits. The acoustic signal is generated by the transmitter module DUPLEX Tx which contains a small siren. The signals are differentiated by Morse codes in order to be able to distinguish between the individual types of alerts referring to individual sensors. The acoustic signalling of parameter violations will be generated even if there is no JETIBOX available. With a connected JETIBOX there will be an indication on its display showing which parameter has been violated. If several parameters have been violated at the same time, the alert sounds change consecutively as well as the indications in the JETIBOX LCD-display.

Our Price

£38.09


Weight [g] 4
Dimensions [mm] 27 x 14 x 5
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 5

More info and manuals can be found HERE

EXPANDER E2 EX

The EXPANDER E2 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 2 sensors to a DUPLEX receiver. The expander can be set in a way which enables the JETIBOX to show several measured values simultaneously.

Our Price

£29.91

Jeti telemetry Measure Sensors EX