Tel: 07947523270

266 Swinnow Lane Leeds LS13 4HP uk

Free shipping on any 3 receivers - contact me for details

Our Price

£67.18

 Please allow a few seconds for the shopping cart to be updated

Rsat 900B

Enhance your signal security with the DC & DS 24 systems using the 900mHz band.

3 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions.

Additional features:

PPM input
PPM output
Integrated expander for EX & EX Bus devices
UDI digital output

Full-range backup receiver compatible with JETI EX 900 & EX Bus protocols. Supports telemetry functions.

Additional features:

PPM input
PPM output
Integrated expander for EX & EX Bus devices
UDI digital output

Jeti Duplex R7Nano  New!


7 channe lindoor receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.


DUPLEX System EX is fully compatible with the previous version of the DUPLEX.

Our Price

£55.46

 Please allow a few seconds for the shopping cart to be updated

Our Price

£61.64

 Please allow a few seconds for the shopping cart to be updated

Weight [g] 30 Dimensions [mm] 63 x 38 x 17
Sustained current [A] 15
Number of channels 15
Telemetry Yes
Operational temperature [°C] -20 ... 75
Compatible protocols EX Bus, PPM
Supply Voltage [V] 4 ... 14
Satellite receiver support Yes
Batteries NiXX 4 ... 10
Batteries LiXX 2 ... 3
Idle current [µA] 120
Number of battery inputs 2
Voltage stabilization No
Peak current (2s) [A] 90

More detailed info can be found HERE

Jeti Duplex Rsat 2 EX


Satellite receiver for Duplex R9, R10, R11EPC, R12EPC, R14 and Duplex R18 (connection by cable). PPM output is available on a single line.
The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts. An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input. DUPLEX EX System is fully compatible with the previous version of the DUPLEX.

•Overload protection on each channel
•Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus)
•Built-in Expander function for up to 3 sensors •Input for magnetic switch or RC switch
•MPX battery input connectors: 2x
•100Hz mode of servo outputs (10ms period)
•Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
•Easy settings changes via DC/DS transmitter
•Firmware updates by user
•Suitable for use with high voltage (HV) servos
•Compact size for easy installation
•Each output is individually configurable (channel assignment, trim, reverse, ATV)

Our Price

£58.11

 Please allow a few seconds for the shopping cart to be updated

Weight [g] 11
Dimensions [mm] 45 x 24 x 12
Number of channels 6
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 100
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 45
Satellite receiver support No
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106  

More info and manual available HERE

Jeti Duplex REX6  New!


6 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX System EX is fully compatible with the previous version of the DUPLEX.

Our Price

£64.28

 Please allow a few seconds for the shopping cart to be updated

Weight [g] 5,5
Dimensions [mm] 40 x 20 x 7
Number of channels 7
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 100
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 40
Satellite receiver support No
Output Power [dBm] 6
Receiver Sensitivity [dBm] -98  

More info and manual available HERE

Jeti Duplex REX7 New!


Receiver DUPLEX R7 EX combines many servo outputs together with small dimensions. R7 EX is designed for easy use in small models. The receiver incorporates two 100mm antennas, JR servo-connectors, and single JR connector for telemetry. Power supply can be provided by any of the servo JR connectors.

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX System EX is fully compatible with the previous version of the DUPLEX. .

Our Price

£70.46

 Please allow a few seconds for the shopping cart to be updated














More info and manual available HERE

Weight [g] 13
Dimensions [mm] 48 x 23 x 10
Number of channels 9
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 200
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 30
Satellite receiver support Yes
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106

More info and manual available HERE

Jeti Duplex R9 EX


9 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Additional features: •PPM input (Sat1)

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts. An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX System EX is fully compatible with the previous version of the DUPLEX.

Our Price

£85.44

 Please allow a few seconds for the shopping cart to be updated

Our Price

£91.62

 Please allow a few seconds for the shopping cart to be updated

Weight [g] 17
Dimensions [mm] 50 x 30 x 13
Number of channels 10
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 200
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 40
Satellite receiver support Yes
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106

Further info and manuals available HERE

Jeti Duplex REX10 New!


10 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions and contains a separate battery plug.

Additional features:

•PPM input (Sat1) •PPM input or output (Sat2)

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX System EX is fully compatible with the previous version of the DUPLEX.

Jeti Duplex R11 EPC EX


11 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions and contains a separate battery power connector.

Additional features:

•PPM input (Sat1)

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX System EX is fully compatible with the previous version of the DUPLEX.

Weight [g] 15
Dimensions [mm] 48 x 23 x 10
Number of channels 11
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 200
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 30
Satellite receiver support Yes
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106

Further info and manuals available HERE

Our Price

£95.14

 Please allow a few seconds for the shopping cart to be updated

Our Price

£110.14

 Please allow a few seconds for the shopping cart to be updated

Weight [g] 22
Dimensions [mm] 50 x 30 x 13
Number of channels 12
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 400
Supply Voltage [V] 3,2 - 8,4
Average Current [mA]
30 Satellite receiver support Yes
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106

Further info and manuals can be found HERE

Jeti Duplex REX12 New!


12 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions and contains a separate battery power connector.

Additional features:
•PPM input (Sat1)
•PPM input or output (Sat2)

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX System EX is fully compatible with the previous version of the DUPLEX.

Weight [g] 30
Dimensions [mm] 62 x 38 x 16
Number of channels 14
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 400
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 40
Satellite receiver support Yes
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106

Further info and manuals can be found HERE

Jeti Duplex R14 EX


14 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply is provided by MPX connector or standard JR connectors.

Additional features:
•PPM input (Sat1)
•PPM input or output (Sat2)

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX EX System is fully compatible with the previous version of the DUPLEX.

Our Price

£132.18

 Please allow a few seconds for the shopping cart to be updated

Jeti Receivers

Jeti Duplex R18 EX


18 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply is provided by MPX connector or standard JR connectors.

Additional features:
•PPM input (Sat1)
•PPM input or output (Sat2)
•JETI Duplex Rsat2 is included in the package

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.

An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX EX System is fully compatible with the previous version of the DUPLEX.

Weight [g] 30
Dimensions [mm] 62 x 38 x 16
Number of channels 18
Telemetry Yes
Operational temperature [°C] -10 ... 85
Compatible protocols DUPLEX 2.4GHz EX, EX Bus
Antenna Length [mm] 2 x 400
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 40
Satellite receiver support No
Output Power [dBm] 15
Receiver Sensitivity [dBm] -106

Further info and manuals can be found HERE

Our Price

£171.86

 Please allow a few seconds for the shopping cart to be updated