Tel: 07947523270

266 Swinnow Lane Leeds LS13 4HP uk

Power systems and Central Boxes from

Jeti Model

Weight [g] 20
Dimensions [mm] 52 x 25 x 11
Sustained current [A] 10
Number of channels 8
Telemetry Yes
Operational temperature [°C] -20 ... 75
Compatible protocols EX Bus, PPM
Supply Voltage [V] 4 ... 14
Satellite receiver support Yes
Batteries NiXX 4 ... 10
Batteries LiXX 2 ... 3
Number of battery inputs 1
Voltage stabilization No
Peak current (2s) [A] 90

Detailed info can be found HERE

Our Price

£528.36


£617.18

please allow a few seconds for the cart to be  updated

Jeti Central Box 200

Weight [g] 30 Dimensions [mm] 63 x 38 x 17
Sustained current [A] 15
Number of channels 15
Telemetry Yes
Operational temperature [°C] -20 ... 75
Compatible protocols EX Bus, PPM
Supply Voltage [V] 4 ... 14
Satellite receiver support Yes
Batteries NiXX 4 ... 10
Batteries LiXX 2 ... 3
Idle current [µA] 120
Number of battery inputs 2
Voltage stabilization No
Peak current (2s) [A] 90

Detailed info can be found HERE

Jeti Central Box 400 & Magnetic Switch or 2 x Rsat +RCSW


The Central Box 400 is a switchboard designed for the complete management of up to 24 servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage two batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected to the Central Box. With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry, and very fast servo response.

Central Box 400 supports up to 24 protected servo outputs, two battery inputs and incorporates  a magnetic switch.

Our Price

£167.64

 Please allow a few seconds for the shopping cart to be updated

Jeti Central Box 200 +2 Rsat and Magnetic Switch

Jeti Central Box 200


The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage two batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected to the Central Box. With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry, and very fast servo response.

Central Box 200 supports up to 15 protected servo outputs, two battery inputs and incorporates possibility to connect an RC or magnetic switch.

•Overload protection on each channel
•Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus)
•Built-in Expander function for up to 3 sensors
•MPX battery input connectors: 1x •100Hz mode of servo outputs (10ms period)
•Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
•Easy settings changes via DC/DS transmitter
•Firmware updates by user
•Suitable for use with high voltage (HV) servos
•Compact size for easy installation
•Each output is individually configurable (channel assignment, trim, reverse, A TV)

Our Price

£105.73

 Please allow a few seconds for the shopping cart to be updated

Jeti Central Box 100


The Central Box 100 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage a single battery and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected to the Central Box. With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry, and very fast servo response.

Central Box 100 supports up to 8 protected servo outputs and a single battery input.


Our Price

£10.00

Jeti car charger for DS and DC  ranges.


Our Price

£229.19

 Please allow a few seconds for the shopping cart to be updated

•Overload protection on each channel
•Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus)
•Built-in Expander function for up to 3 sensors
•Input for magnetic switch or RC switch
•MPX battery input connectors: 2x
•100Hz mode of servo outputs (10ms period)
•Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
•Easy settings changes via DC/DS transmitter
•Firmware updates by user
•Suitable for use with high voltage (HV) servos
•Compact size for easy installation
•Each output is individually configurable (channel assignment, trim, reverse, ATV)

CB400 + magnetic switch


CB400 +2x Rsat +RC Switch