Tel: 07947523270

266 Swinnow Lane Leeds LS13 4HP uk

Our Price

£70.50

Our Price

£117.99

Our Price

£117.99

PQ12 Product Pages


PQ12 "P" & "S" Series  




L16 Product Pages


L16 "R" Series  




L16 "S" Series  




L16 "P" Series  

L12 EV3 100mm


Lego Mindstorms*, EV3*, Power Functions*, and Technic* compatible linear actuators. These linear actuators are self contained units which include an electric motor. They will push up to 25N and move at 12mm/s unloaded. The maximum movement of this model is 50mm (~2 Inches).

For use with your NXT* or EV3* Brick, you will need one of the standard motor connection cables that are included in the Mindstorms* kit. The L12-NXT Software Block can be downloaded from http://www.firgelli.com/Uploads/L12-NXT.zip , and the L12-EV3 block can be downloaded from http://www.firgelli.com/Uploads/L12-EV3.zip
For manual use with Lego Power Functions* you will require the Cable-NXT-PF available on this site. 

For manual use with older Lego Technic* style battery packs you will require the Cable-NXT-Technic available on this site. 
Please note: The Lego Group does not endorse these products. 

*Lego, NXT, EV3, Mindstorms, Technic and Power Functions are trademarks of The Lego Group. 

L12 EV3 50mm


Lego Mindstorms*, EV3*, Power Functions*, and Technic* compatible linear actuators. These linear actuators are self contained units which include an electric motor. They will push up to 25N and move at 12mm/s unloaded. The maximum movement of this model is 50mm (~2 Inches).

For use with your NXT* or EV3* Brick, you will need one of the standard motor connection cables that are included in the Mindstorms* kit. The L12-NXT Software Block can be downloaded from http://www.firgelli.com/Uploads/L12-NXT.zip , and the L12-EV3 block can be downloaded from http://www.firgelli.com/Uploads/L12-EV3.zip
For manual use with Lego Power Functions* you will require the Cable-NXT-PF available on this site. 

For manual use with older Lego Technic* style battery packs you will require the Cable-NXT-Technic available on this site. 
Please note: The Lego Group does not endorse these products. 

*Lego, NXT, EV3, Mindstorms, Technic and Power Functions are trademarks of The Lego Group. 

wireless remote control


The Actuonix 12V DC wireless remote control kit is perfect for controlling your 12v L12-S, L16-S or PQ12-S (with cable adapter) actuator remotely. The kit comes with two-2 button remote controls (up, down) and remote receiver. This remote is very small in size and easy to install and operate. This product is perfect for home, hobby or automotive use where wireless DC control is required. Remotes have approx 100M range. Shipping weight 188 Grams (Receiver + 2 remotes). These units are FCC, CE and RoHS compliant.
Note: This remote control will only work with our 12vdc actuators.


Features

  • Plug 'n play with our "S" series actuators! 
    Up to 100m range
    2 remotes with batteries included

Linear Actuator control board


The Linear Actuator Control Board is a stand-alone closed-loop control board specifically designed for Firgelli "P" series actuators. The LAC greatly simplifies designs by saving the development time, cost, and processor overhead associated with direct motor control. As little as 1 digital or analog output is required for position control. Supported input signals include USB, Voltage, Current, RC Servo, and PWM. On board adjustment of speed, sensitivity, and stroke limits are available. The LAC can be operated as both an interface board, or as a stand alone controller with the addition of an external potentiometer and power supply. Each LAC Board controls 1 linear actuator and will require an external power supply rated for the actuator. 
The LAC will work with the L12-P, PQ12-P and L16-P. It may also be able to drive other larger actuators that have position feedback. 
A 6vdc or 12vdc power supply is required for operation (not included) 

Product weight is 19.5g

PQ12 Linear Actuators


The Actuonix PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. The PQ12 is available with end of stroke limit switches or with linear feedback along the full length of stroke. A complete closed loop system can be realized with the addition of an LAC board.
 “S” Series: 
These units are operated by reversing polarity on pin 2&3 of the actuator’s flat cable. The “S” series has end of stroke limit switches to that will turn off the unit if it runs into its end stop.These can be run with a DPDT switch, relay or brushed DC motor controller. The PQ12-S is available in 6v or12v.
“P” Series
The “P” series actuators offer no built-in control­ler, but do provide an analog position feed­back signal that can be input to an exter­nal controller. The “P” series can plug directly into our Linear Actuator Control Board (LAC) to give the “P” series the ability to be controlled with USB (via our Configuration Utility Software), 0-5v, 4-20mA, RC Servo or PWM. On board adjustment of speed, sensitivity and stroke limits are also available via the LAC. The PQ12-P is available in 6v or12v.

​PQ12-20mm Weight: 18g Length: Closed 47mm Open 67mm

L16 Actuator Series


​The L16 series is slightly larger version of the L12 series. It has an axial design that utilizes a powerful PMDC motor and a rectangular cross section for increased strength. But by far the most attractive feature of this actuator is the broad spectrum of configurations available.Firgelli Technologies L16 series is available in three stroke lengths: 50mm 100mm or 140mm along with three force/speed combinations of 35:1, 63:1 or 150:1 gearing.
“R” Series:
The "R" sereis use a stan­dard hobby-type remote-control digital ser­vo interface (CMOS logic), and are plug n' play compatible with most RC receivers. The L16-R is 6v unit only.
“S” Series: 
These units are operated by reversing polarity on the actuator’s two leads. The “S” series has end of stroke limit switches to that will turn off the unit if it runs into its end stop.These can be run with a DPDT switch, relay and are perfect for home or vehicular automation projects.The L16-S is 12v only.
“P” Series
​The “P” series actuators offer no built-in control­ler, but do provide an analog position feed­back signal that can be input to an exter­nal controller. The “P” series can be used with our Linear Actuator Control Board (LAC) to give the “P” series the ability to be controlled with USB (via our Configuration Utility Software), 0-5v, 4-20mA, RC Servo or PWM. On board adjustment of speed, sensitivity and stroke limits are available via the LAC. The L16-P is 12v only.

L16-50mm Weight: 54g Length: Closed 124mm Open 174mm
L16-100mm Weight 72g Length: Closed 176mm Open 276mm 
L16-140mm Weight: 84g Length: Closed 216mm Open 356mm

L12 Actuator Series


The L12 series is an axial design that utilizes a powerful PMDC motor and a rectangular cross section for increased strength. But by far the most attractive feature of this actuator is the broad spectrum of configurations available.Firgelli Technologies L12 is available in four stroke lengths: 10mm (Except “I” and "R"), 30mm, 50mm or 100mm, along with three force/speed combinations of 50:1, 100:1 or 210:1 gearing.
“I” Series:
​The “I” actuator models feature an on-board software-based digital microcon­troller. The controller is non programmable and will configure itself for one of 4 input modes depending on which leads are plugged in on power up. Available input modes are: RC servo, 0-5v, 4-20mA or PWM. The “I” series is available in both 6v and 12v models.“R” Series:This is a stan­dard hobby-type remote-control digital ser­vo interface (CMOS logic), compatible with most RC receivers. They are a 6v unit only.
“S” Series:
These units are operated by reversing polarity on the actuator’s two leads. The “S” series has end of stroke limit switches to that will turn off the unit if it runs into its end stop.These can be run with a DPDT switch, relay or brushed DC motor controller. The “S” series is available in both 6v and 12v models.
“P” Series
​The “P” series actuators offer no built-in control­ler, but do provide an analog position feed­back signal that can be input to an exter­nal controller. The “P” series can be used with our Linear Actuator Control Board (LAC) to give the “P” series the ability to be controlled with USB (via our Configuration Utility Software), 0-5v, 4-20mA, RC Servo or PWM. On board adjustment of speed, sensitivity and stroke limits are available via the LAC. The “P” series are available in 6v or 12v models.

“R” Series:
​This is a stan­dard hobby-type remote-control digital ser­vo interface (CMOS logic), compatible with most RC receivers. They are a 6v unit only

L12-10mm   Weight: 26g Length: Closed 70mm Open 80mm (10 mm available in S or P option) 
​L12-30mm   Weight: 30g Length: Closed 90mm Open 120mm
L12-50mm   Weight 36g Length: Closed 110mm Open 160mm 
L12-100mm Weight: 52g Length: Closed 160mm Open 260mm


L12 Product Pages


L12 "I" Series  



L12 "S" Series  



L12 "P" Series  




L12 "R" Series

Our Price

£70.50